After a lot of trial and error I have found how to reprogram a Lantra Remote, here's how to do it.
1 disable the immobiliser
2 turn the ignition ON within 30 sec the LED goes off
3 Press and hold the button under the dash beside the remote socket, the LED turns ON, let the button go, the indicators flash twice
4 Press and hold the button again until the LED turns OFF and let the button go, the LED will flash once and you're ready to program your remote. (Now don't get caught, you will have to reprogram ALL of your remotes !!!)
5 Insert your 1st. remote into the socket, the LED flashes twice when it's programmed.
6 remove the 1st remote and replace with your other remote, wait for the flashes and keep going until all of your remotes are programmed.
7 This is important! When you're finished turn your ignition OFF and wait for 30 sec before you try out your reprogrammed remotes.
This procedure worked for me with two remotes, hope it helps someone as this was a real headache !!!
1 disable the immobiliser
2 turn the ignition ON within 30 sec the LED goes off
3 Press and hold the button under the dash beside the remote socket, the LED turns ON, let the button go, the indicators flash twice
4 Press and hold the button again until the LED turns OFF and let the button go, the LED will flash once and you're ready to program your remote. (Now don't get caught, you will have to reprogram ALL of your remotes !!!)
5 Insert your 1st. remote into the socket, the LED flashes twice when it's programmed.
6 remove the 1st remote and replace with your other remote, wait for the flashes and keep going until all of your remotes are programmed.
7 This is important! When you're finished turn your ignition OFF and wait for 30 sec before you try out your reprogrammed remotes.
This procedure worked for me with two remotes, hope it helps someone as this was a real headache !!!