So I'm replacing the wimpy horn on my '09 SE, got a set of these 2 Piece 12 Volt Electric Horn Set as the replacements. Got the wiring done and hooked them up for a test. Worked great, unbelievably loud, very sweet. Then I did the physical installation and when I hooked them up again, nothing. The new horns are have a ten amp fuse, the car has a ten amp fuse, so I didn't use the relay included with the new horns. Now there is no juice at the fuse (the fuse isn't blown). However, when I activate the horn at the steering wheel I hear a click under the dash. So I know the horn switch on the steering wheel is working. There must be a relay under the dash (the clicking I hear) somewhere, is it this: HORN ASSEMBLY - BURGLAR ALARM. RELAY & MODULE ((KEYLESS ENTRY-PANIC) .). 2009 Hyundai Accent # 966201E300 or is there another relay I'm not finding? TIA for any help!
↧