I have a 1997 / 1998 Hyundai Sonata 2.0 GLS Auto DOHC 16 Valve / 4 Cylinder. Engine is G4CP. I Recently had my spark plugs changed however the fourth spark plug wire / boot keeps jumping out as if pressure is pushing it out when I drive at higher rpms. Also my 2nd Spark Plug wire is getting lose and not fitting snug anymore. Seems that these spark plug wires are not OEM or NGK ones. Spark plugs were replaced according to spec i.e BPR6ES (1 to 1.11mm gap) (NGK). I'm going to change the wires with better quality ones soon. I need a diagram / picture showing the numbering i.e which cylinder head number corresponds to the sockets on the distributor cap (situated behind the engine in my car). Since these wires have varying length I need to know which goes where. I replaced 2 worn wires with some spare ones I had though I'm sure they are not the proper length for the intended cylinder to distributor cap connection. Will this make a difference?
↧